The Best image capture solution in the Market Today!

Model : FC-1000	Price : US$ 189.00 Note: For on-time delivery, please make sure you add your telephone number as required by UPS

Note: Corporate customers can place COD orders by sending an email to sales@fclab.com There's an COD fee of US$ 8. For Express delivery, the freight is US$ 55

Overview | Feature |Specifications| Requirement|Application

Overview :

The FC-1000 is a series of high speed USB2 camera module features latest industry interface standard USB2.0 and highest quality 1.3Mpixel CMOS image sensor .it greatly improves the image capture connectivity and Image quality for most of image capture application without extra frame grab card. It gives superior video quality through high-speed data transfers.24 bit true color processing

The selected image sensor is the highest-quality 1.3-megapixel CMOS image sensor on the market, with advanced Digital Clarity noise-reduction. This revolutionary CMOS image sensor achieves sharp, CCD-level image quality.

FC-1000 can capture any size of live image from 100F/S to 10 F/S without compression. It can bring super resolution live image to your desk up to 1280x1024 and also can adapt to your PC actual speed to capture any resolution still image with variable exposure time from 1ms to 500ms.

Advanced camera control is available to synchronize with any external trigger event . Up to 20 GPIO logic output/input can be control by PC through USB2 cable.

With simplify design no power supply is needed. The FC-1000 module is the most compact and lowest cost design in market that fit the most demanding application and product.

Features:

High speed USB2.0 (480Mbits/sec) 40X Faster than USB1.1
1.3 Megapixel Color or Monochrome, Progressive scan
CCD level quality sensor support visible, Infrared UV
Capture mode support: Still Images, Event Acquisition,Video Capture
Frame Rate Up to14 fps at 1280 x 1024,16 fps at 1024x768,20 fps at 800x600,28 fps at 640x480,40fps at 320x240
Capture can sync with lighting on/off including flash strobe
GPIOs for control of peripherals and synchronization of lighting
An onboard processor can handle extra customized firmware function
Support Region-of-Interest (ROI) windowing
From software/firmware/hardware Fully customize and migrate to final product
8 bits raw data without compression, software Bayer filter decode
Image data , power and full camera control over a single USB cable extend to 5 meter
TWAIN and API provided
API software support
Work with Windows 2K and Windows XP
Complete SDK and DEMO application available.
Plug and play installation
C-Mount lens holder provided
No frame grabber required

API support following fuctions:

Auto white balance
Auto exposure control
Gamma correction
64 step Signal gain
Exposure time 1ms to 500ms
Image flip and mirror
variable windows size and position on fly

Specifications:

Image Sensor	1/2” format, 6.6mm x 5.3mm array
Pixel Size	5.2ux 5.2u
Spectral Response	400 ~ 1000 nm
Dark Current	50e/sec @ 35C
Data rate	48Mhz
Shutter	Electronic Rolling snap
Color filter	R,G, B primary color filters
Readout Method	Progressive Scan
IR cut off filter	Optional
Effective Pixels	1280 x 1024
Sensitivity	1.8V/lux-sec @ 550nm
Dynamic Range	62dB
Auto Exposure	Automatic / Manual
White Balance	Automatic / Manual
Dimensions (W x H x D)	2.00 x 2.00 x 0.5 inches (board level)
Mass	~150g
Power Requirement	USB bus power 200mA
Power Consumption	~1 Watts
Operating Temperature	0° C to +50° C
Operating Humidity	20%-80%, Non-condensing
Interface Connector	Standard USB
Lens Mount	C-Mount

Application:

Most of image capture experiments , projects through computer
Variety image capture experiments through computer.
Moving stroke analyze.
Quality ID Photo capture with lighting control
PC web camera transfer high quality large image in real-time through wide-band network
Instant document scanner , 2D ,3D barcode and OCR application
Robot machine vision
Security video recording , transferring
College , university education for student project

System Requirements:

350Mhz Pentium II processor or above, Pentium III 800MHz or greater for full performance
128mb system memory
Hi-Speed USB 2.0 port
Display card capable of ture-color mode
Microsoft 2000 or XP
Since video processing is hardware intensive, a faster computer with a fast hard disk drive and extra memory will yield better results.

Some computers, particularly notebook computers, may only have USB 1.1 ports. You can not use a FC-1000 camera with a USB 1.1 port. You can also upgrade your system by adding USB 2.0 ports via an expansion card. If you install such a card, confirm that it is properly installed or the FC-1000 camera may not work properly.