FAQ

FC1000/2000 Module FAQ

What's special about the FC1000/2000 USB2 Camera?
  Our USB2 Camera is a highly customizable module Here's a few highlights:

What's inside SDK
In addition to the users manual, there are 2 parts inside the SDK:

What's platform for the module  
At present time we provide the SDK for Windows 2000 and Windows XP only

What's the language for development
We provide the sample source code in VC++, however there's no problem if the developer want to use Visual Basic

 

USB 2.0 FAQ

How fast is USB 2.0?
USB 2.0 will be 480 Mb/sec, 40 times faster than USB 1.1.  With protocol and packet overhead, the maximum data throughput is approximately

How far away from a host can a peripheral be located?
The maximum cable length is 5 meters for a single cable and extending up to 30 meters, using 5 hubs. 

How many devices can be connected to one host?
You may connect up to 127 devices to a single host.

What's the status of Hi-Speed USB 2.0 in the marketplace?
Hi-Speed USB 2.0, the technology that extends the speed of the peripheral-to-PC connection up to 40 times over existing capabilities, is now market ready. In fact, dozens of Hi-Speed USB 2.0 products are now in the market in the U.S., Japan, and elsewhere. XP drivers are currently available from Microsoft. 98Se, ME, 2000 drivers are available from 3rd party vendors (Orange Micro and Adaptec). Expect to see USB 2.0 PCs shipping in Q3 2002 as Intel's 845 chipset hit the mass market with integrated USB 2.0 controllers.

What are the benefits of Hi-Speed USB 2.0?
The higher bandwidth of Hi-Speed USB 2.0 will support the most demanding PC user applications, such as digital image creation and web publishing, where multiple high-speed peripherals will be running simultaneously. Hi-Speed USB 2.0 is expected to replace USB 1.1, which is already a ubiquitous connector on PC systems today for such peripherals as keyboards, mice, joysticks, removable storage, printers and scanners.

When was the final USB 2.0 specification released?
The spec was released at WinHEC in April 2000.  

Who developed the USB 2.0 spec?
The USB 2.0 spec was developed by a team of seven industry-leading companies, collectively named the USB 2.0 Promoter Group. The group consists of Compaq, Hewlett Packard, Intel, Lucent, Microsoft, NEC, and Philips.

Since Hi-Speed USB 2.0 is now about the same speed as IEEE 1394a, don't they compete?
No. Hi-Speed USB 2.0 is expected to become ubiquitous on all PC platforms because it is more easily integrated into the core chipsets, at which time it will become the preferred connection for PC peripherals. IEEE 1394's primary target is audio/visual consumer electronic devices such as digital camcorders, digital VCRs, DVDs, and digital televisions. Therefore, the two connections will differ primarily in application focus.

What is USB On-the-Go?
The supplement to the USB 2.0 specification is expected to be available in early 2002. It is currently under development by a subcommittee authorized by the USB 2.0 Promoter Group, the original developers of the USB 2.0 specification.

Is Microsoft supporting Hi-Speed USB 2.0 in Windows XP?
Microsoft fully supports Hi-Speed USB 2.0, and has been working to develop driver support since its inception. Microsoft currently has production Windows XP drivers available and is expected to have Windows 2000 drivers available by the end of the year."

Which Intel P4 Motherboards support USB2.0?
Intel ICH4 Southbridge chipsets support built-in USB2.0 EHCI.  These are included on the 845G, 845GL and 845E chipset family. A list of current Intel motherboards can be found at:  http://developer.intel.com/design/motherbd/flex.htm

2001-2006© Faymax All Right Reserved